Cygnal Technologies Forum
Switch topography - Printable Version

+- Cygnal Technologies Forum (https://forum.cygnaltech.com)
+-- Forum: Mikrotik (https://forum.cygnaltech.com/forumdisplay.php?fid=4)
+--- Forum: Beginner (https://forum.cygnaltech.com/forumdisplay.php?fid=5)
+--- Thread: Switch topography (/showthread.php?tid=21)


Switch topography - Luckyflores - 03-10-2021

question regarding lang po sa location ng switch

using CCR as core router po 1036 8g 2s+ 

we have 5 wan and 5 pppoe concetrators so kulang na po yung ports sa CCR 

is it better to have the switch on the wans using vlans or sa pppoe concetrators na lang po gagamitin?  

as of now, sa pppoe concentrators ko po ginamit using the sfp+ ports para 10g po then i just used the 8 ports for the WAN 

thank you thank you

RE: Switch topography - Dans - 03-10-2021

(03-10-2021, 08:02 AM)Luckyflores Wrote:  question regarding lang po sa location ng switch

using CCR as core router po 1036 8g 2s+ 

we have 5 wan and 5 pppoe concetrators so kulang na po yung ports sa CCR 

is it better to have the switch on the wans using vlans or sa pppoe concetrators na lang po gagamitin?  

as of now, sa pppoe concentrators ko po ginamit using the sfp+ ports para 10g po then i just used the 8 ports for the WAN 

thank you thank you

yes, you can use your AC as an extension of your core to attach your WAN, you can use vlan tutal directly connected naman

wag ka lang malito sa pag-bind ng vlan and sa actual cabling.

RE: Switch topography - danilzky - 03-10-2021

(03-10-2021, 08:08 AM)Dans Wrote:  
(03-10-2021, 08:02 AM)Luckyflores Wrote:  question regarding lang po sa location ng switch

using CCR as core router po 1036 8g 2s+ 

we have 5 wan and 5 pppoe concetrators so kulang na po yung ports sa CCR 

is it better to have the switch on the wans using vlans or sa pppoe concetrators na lang po gagamitin?  

as of now, sa pppoe concentrators ko po ginamit using the sfp+ ports para 10g po then i just used the 8 ports for the WAN 

thank you thank you

yes, you can use your AC as an extension of your core to attach your WAN, you can use vlan tutal directly connected naman

wag ka lang malito sa pag-bind ng vlan and sa actual cabling.

yung sa mum presentation mo sir

RE: Switch topography - Dans - 03-10-2021

(03-10-2021, 08:42 AM)danilzky Wrote:  
(03-10-2021, 08:08 AM)Dans Wrote:  
(03-10-2021, 08:02 AM)Luckyflores Wrote:  question regarding lang po sa location ng switch

using CCR as core router po 1036 8g 2s+ 

we have 5 wan and 5 pppoe concetrators so kulang na po yung ports sa CCR 

is it better to have the switch on the wans using vlans or sa pppoe concetrators na lang po gagamitin?  

as of now, sa pppoe concentrators ko po ginamit using the sfp+ ports para 10g po then i just used the 8 ports for the WAN 

thank you thank you

yes, you can use your AC as an extension of your core to attach your WAN, you can use vlan tutal directly connected naman

wag ka lang malito sa pag-bind ng vlan and sa actual cabling.

yung sa mum presentation mo sir

yes! yung nga! MUM 2014 yata yon

RE: Switch topography - Luckyflores - 03-10-2021

i think ang concern ko is, what is the better topoloy para ma fully utilize yung cores ni mikrotik

RE: Switch topography - danilzky - 03-10-2021

Ito po

Augmenting multiple CCR for port expansion utilizing VLAN

RE: Switch topography - Dans - 03-10-2021

(03-10-2021, 08:47 AM)Luckyflores Wrote:  i think ang concern ko is, what is the better topoloy para ma fully utilize yung cores ni mikrotik

so directly attached ang mga AC mo sa core mo? kaya ka naubusan ng ports sa ccr?

your question was, kung mag-dadagdag ka ba ng switch+vlan sa wan side or kukunin mo sa AC ang ports para magamit mo sa wan?

kung ang concern mo ay ang ports sa core at nauubos na,

get a 10gb switch, duon mo ikabt ang mga AC mo, para ma-freeup ang ports sa core mo.

umaabot ka na ba ng 10gb sa mga AC?

RE: Switch topography - Luckyflores - 03-10-2021

(03-10-2021, 08:51 AM)Dans Wrote:  
(03-10-2021, 08:47 AM)Luckyflores Wrote:  i think ang concern ko is, what is the better topoloy para ma fully utilize yung cores ni mikrotik

so directly attached ang mga AC mo sa core mo? kaya ka naubusan ng ports sa ccr?

your question was, kung mag-dadagdag ka ba ng switch+vlan sa wan side or kukunin mo sa AC ang ports para magamit mo sa wan?

kung ang concern mo ay ang ports sa core at nauubos na,

get a 10gb switch, duon mo ikabt ang mga AC mo, para ma-freeup ang ports sa core mo.

umaabot ka na ba ng 10gb sa mga AC?

hehehe wala naman po sa 10gb, sana soon 

ayun, yan na po ginawa ko, 10gb switch para sa mga AC.

thank you thank you